Araçları aç

Araçlar

İşi seçin.

Arayın veya bir koleksiyon ya da kategori seçin. Her kart aracı açar.

Yeni

Voltage Drop Calculator

Single-phase or three-phase drop from current, length and the conductor resistance and reactance you supply.

Mühendislik Tarayıcıda
Yeni

Rebar Weight Calculator

Weight per metre and total weight from diameter, length and bar count, with editable steel density.

Mühendislik Tarayıcıda
Yeni

Section Properties Calculator

Area, second moments, section moduli and radii of gyration for rectangle, circle, hollow and I shapes.

Mühendislik Tarayıcıda
Pro Yeni

Bar Bending Schedule Assistant

Cut lengths, weight per mark and totals with a configurable hook allowance and a per-mark table.

Mühendislik Tarayıcıda
Pro Yeni

Simple Beam Calculator

Reactions, maximum shear and moment for four load cases, with deflection when E and I are supplied.

Mühendislik Tarayıcıda
Yeni

Concrete Quantity Calculator

Volumes for slabs, beams, columns, footings and walls, with waste and a cubic-yard conversion.

Mühendislik Tarayıcıda
Yeni

Formwork Quantity Calculator

Contact area by element: slab soffit, beam faces and soffit, column, footing and wall faces.

Mühendislik Tarayıcıda
Yeni

Excavation & Backfill Calculator

Trench or pit volume with side slopes, structure deduction, bulking and shrinkage factors.

Mühendislik Tarayıcıda
Yeni

Blockwork & Wall Quantity

Net wall area, block count with joints and waste, plus a mortar volume estimate.

Mühendislik Tarayıcıda
Yeni

Flooring & Tile Quantity

Tiles, boxes and optional material cost from floor area, tile size, joint and cutting allowance.

Mühendislik Tarayıcıda
Yeni

Drawing Scale Calculator

Paper measurement to real size at 1:50, 1:100, 1:200 or any scale, plus the area factor.

Mühendislik Tarayıcıda
Pro Yeni

BOQ Quantity Summary

Item, unit, quantity and rate with subtotals, VAT and a priced bill table you can export.

Mühendislik Tarayıcıda
Yeni

HVAC Duct Airflow Calculator

Velocity in a rectangular or round duct, or the duct size needed for a target velocity.

Mühendislik Tarayıcıda
Yeni

Pipe Flow & Pressure Loss

Velocity, Reynolds number, friction factor, head loss and pressure drop by Darcy–Weisbach.

Mühendislik Tarayıcıda
Yeni

Coordinate Converter (WGS84 to UTM)

Latitude/longitude to UTM easting, northing and zone, and back, on the WGS84 datum.

Mühendislik Tarayıcıda
Yeni

Slope & Gradient Calculator

Gradient percent, ratio, angle, slope length and H:V batter from a rise and a run.

Mühendislik Tarayıcıda
Yeni

Level Book Calculator

Height of instrument, reduced levels, the arithmetic check and misclosure from backsight, intermediate and foresight readings.

Mühendislik Tarayıcıda